digital indicator (ns-yb05c-b-i/v) z dimension:9648mm 0~5v/4~20ma direct input signal z with 24 vdc feed power which supply to sensor for working z display scope: -19999~99999 z sampling rate: 4 12 times/sec. z modes for resetting: (three ways) a) ordinary mode: when push the ref/shift button, the display va lue can be 0 (zero cleaning), when push it agai n, it will be reposition. b) trigger mode: the display value will be 0 when push the button every time c) automatic mode: can reset automatically when the measured value lower than setting value z modes for holding the peak value: ordinary mode, trigger mode, automatic mode z 1~4 groups relay output and give alarm with buzzer (optional) alarm mode: lower limit alarm, upper limit alarm, intra-area, external-area alarm z 0~5v or 4~20ma analog output (optional) z rs232/ rs485 communications for data acquisition (optional) z units of measurement can be switched (optional) free datasheet http://
ns-yb05c-b ordering information ns-yb05c- trademark code dimension (mm) b 96 48 110 code input type w 0~20mv input signal( can for 2 6 sensors input ) l 0~1k ??5k ? ?10k ? resistance signal input i 4~20ma signal input v 0~5v,0~10v signal input code relay output 0 no relay 1 one relay 2 two relay code analog signal output 0 no analog signal output 1 0~5v analog signal output 2 4~20ma analog signal output code communication mode 0 no communication 1 rs232 2 rs485 code supply mode a ac220v ac90~265(switching power supply) d dc24v ns-yb05c- b- v- 2- 1- 2- a- free datasheet http://
|
